Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
How to Change a Tire Tube on Your Electric Scooter: A Step-by-Step Guide
To shop our replacement tires and learn more about the different types of tires for electric scooters, see here.
**We also have videos for replacing tires on youtube. **
Dealing with a flat tire on your electric scooter can be a daunting task, but fret not! This comprehensive guide will walk you through the steps to change the tire tube on your electric scooter with ease.
Step 1: Gather Your Tools
Before starting, gather the necessary tools: an adjustable wrench, a tire lever, and a new tire tube compatible with your scooter. You may also want an air pump and a bucket of soapy water for easier installation and detection of any potential leaks.
Step 2: Remove the Wheel
First, switch off your scooter and put it in a stable position. With the adjustable wrench, loosen the nuts securing the tire on both sides. Make sure to keep track of the spacer and washers. Gently slide the wheel off the axle.
Step 3: Deflate the Old Tube
Press the valve on the tire to let out any remaining air. For tires with locking nuts, use your wrench to loosen them before deflating.
Step 4: Remove the Tire
Insert the tire lever between the tire and wheel rim, pulling toward you to pry the tire away from the rim. Carefully work your way around the tire until one side is fully removed. Reach inside and pull out the old tire tube.
Step 5: Check the Wheel Rim
Before installing your new tire tube, inspect the wheel rim for any sharp edges or debris that might damage the new tube. Remove any foreign objects.
Step 6: Install the New Tube
Inflate your new tube slightly, enough to give it shape but not fully expanded. Insert the partially inflated tube into the tire, making sure that the valve is aligned with the hole in the rim. Gently push the tire's edge back onto the rim, using the tire lever if necessary.
Step 7: Inflate the New Tube
Once the tire is securely back on the rim, inflate the tube using your air pump to the recommended PSI (usually found on the tire's sidewall). Dip the inflated tire in the bucket of soapy water and watch for bubbles, which indicate a leak. If there are no leaks, continue to the next step.
Step 8: Reattach the Wheel
Slide the wheel back onto the axle, making sure to reinsert the spacer and washers. Tighten the nuts on both sides with your adjustable wrench. Double-check to ensure the tire rotates smoothly and freely.
Step 9: Test Your Scooter
Take your scooter for a short test ride to ensure everything is functioning correctly and the new tire tube is installed properly. Enjoy your newly repaired electric scooter!
Changing a tire tube on your electric scooter is a simple and practical skill that all scooter owners should know. With these steps, you'll be back on the road in no time!