Install a NT1250 with Harness in Your Electric Razor E100 Scooter: A Step-by-Step Guide

Looking to upgrade your Electric Razor E100 scooter with a new NT1250 and harness? You're in the right place! In this guide, we'll walk you through the entire process, step-by-step, from start to finish. Here's what you'll need to complete this project: a NT1250 control module, a compatible wiring harness, a small screwdriver, a 5mm Allen wrench, and a little bit of patience. Ready to get started? Let's dive in!

Step 1: Prepare Your Scooter
First things first, you need to disconnect the battery and remove the deck plate to access the internal components of your scooter. To do this, use a 5mm Allen wrench to remove the six screws that hold the deck plate in place, then set the plate aside.

Step 2: Locate the Existing Control Module
Next, locate the existing control module in your scooter. This is a small, rectangular-shaped box found near the battery compartment. You'll need to remove this before installing your new NT1250. To do this, simply disconnect the wiring harness from the old control module by gently pulling on the connectors.

Step 3: Install the New NT1250 Control Module
Now it's time to install the new NT1250 control module. Position the module in the same spot as the old one and secure it in place using the original mounting holes.

Step 4: Connect the Wiring Harness
With the new control module in place, it's time to connect the wiring harness. Carefully follow the color-coded connectors to ensure proper connections. Each connector is designed to fit only its corresponding slot, so don't force them if they don't seem to fit. If you have any doubts, consult the instruction manual that came with your NT1250 for further clarification.

Step 5: Reassemble Your Scooter
Once all the connections have been made, it's time to reassemble your scooter. Place the deck plate back on and secure it in place using the six screws you removed earlier. Reconnect the battery and test your new NT1250 control module to ensure everything is functioning correctly.

Congratulations, you've successfully installed a new NT1250 control module with a harness in your Electric Razor E100 scooter! Enjoy the improved performance and ride like never before!