Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Kickstarting Your Razor Electric Scooter Adventure: A Step-By-Step Guide
Razor electric scooters have taken the world by storm, and for good reason. They offer an eco-friendly and cost-effective way to explore your surroundings while providing hours of fun. Many first-time users may be unfamiliar with the process of starting and operating an electric scooter. In this guide, we'll walk you through the step-by-step process of how to start a Razor electric scooter and set you on your way to an electrifying ride.
Step 1: Charge Up
Before using your Razor electric scooter, ensure the battery is fully charged. Connect the scooter to a power outlet using the included charger. Charging times vary depending on the model but typically range from 8 to 12 hours for a full charge.
Step 2: Safety First
Ensure you have the appropriate safety gear before setting off on your scooter. This includes a helmet, elbow pads, and knee pads. Wearing protective gear is not just a smart move – it's often required by law.
Step 3: Locate the Power Switch
Razor electric scooters come with a power switch, usually located on the scooter's base or handlebar. Turn the power switch on and wait for the indicator light to confirm the scooter is ready to go.
Step 4: Begin with a Kick-start
Most Razor electric scooters require an initial kick-start to get going. Begin by pushing off with one foot and placing the other foot on the scooter's deck. Once you reach a speed of approximately 3 mph (5 km/h), engage the throttle.
Step 5: Throttle Control
Your Razor electric scooter's speed is controlled by the throttle, typically located on the right handlebar. Gently twist the throttle toward you to speed up, and release it to slow down. This may take some practice, so take it slow until you're comfortable with the controls.
Step 6: Braking
When it's time to slow down or stop, use the brake lever located on the left handlebar. Depending on your scooter model, this may engage a handbrake, a rear-wheel brake, or both. Practice braking at various speeds to familiarize yourself with your scooter's braking capabilities.
Step 7: Maintenance
Regularly check your scooter for any signs of wear or damage. Keep the tires properly inflated, and check that all nuts and bolts are securely tightened. Consult your user manual for any model-specific maintenance requirements.
And with that, you're ready to embark on your Razor electric scooter adventure. Follow these simple steps, practice safe riding, and you'll be zipping around your neighborhood in no time.

