Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Resetting Your Electric Scooter Controller: A Step-by-Step Guide
Electric scooters are popular vehicles for short commutes, offering an eco-friendly and convenient mode of transportation. Like any other device, they may sometimes encounter issues that require resetting or reconfiguring their controller for optimal performance. In this article, we cover the steps you need to take to reset your electric scooter controller and restore it to factory settings.
Before diving into the reset procedure, it's important to ensure your electric scooter is completely powered off. Turn off the scooter using the power button and disconnect it from any charging sources. For added safety, you may want to remove the battery if it's easily accessible. Once you've done this, you're ready to begin.
Access the scooter controller: Locate and remove the necessary panels to access the scooter's controller. This may differ depending on the make and model of your scooter. You may need to unscrew or unlatch various parts of the scooter to gain access. Ensure you keep track of the screws and components to make reassembly easier.
Locate the reset button: Once you've reached the controller, look for a small button or pinhole with a label such as “Reset” or “Clear”. This button is typically located on or near the controller's circuit board. If you're having trouble locating the button, consult your scooter's manual or search online for specific guidance related to your model.
Press and hold the reset button: Use a small tool, such as a paperclip or pin, to press and hold the reset button. Hold the button down for about 10-15 seconds, then release.
Reconnect the battery and power on: Reinstall the battery and close up the scooter, making sure to replace all panels and screws in their proper locations. Power on the scooter to check if the reset was successful.
Test the scooter functions: After the controller reset, test the scooter's various functions, such as acceleration, braking, and lights, to ensure everything is working properly. If the issue persists, you may need to consult a professional repair service or contact the scooter manufacturer for further assistance.
By following these simple steps, you can easily reset your electric scooter controller and get back on the road in no time.

