Starting Your Ride: A Step-by-Step Guide to Turning on a Jetson Electric Scooter

Embarking on a journey with your Jetson Electric Scooter begins with the simple task of turning it on. This straightforward process will set you on the path to a smooth and enjoyable ride. Here's a step-by-step guide to help you power up and get moving in no time.

Step 1: Fully Charge Your Scooter

Before you start your journey, ensure your Jetson scooter is fully charged. Connect the charger to the scooter and plug it into an outlet. Once the indicator light shows a full charge, you're ready to go.

Step 2: Locate the Power Button

The power button is typically found on the display or control panel at the handlebars. It could be a standalone button or integrated into the display interface.

Step 3: Power On the Scooter

Press and hold the power button for a few seconds until the display lights up. You should hear a beep or see a light indicator to confirm that the scooter is turned on.

Step 4: Check the Safety Features

Ensure that all safety features, such as the brakes and lights, are functioning correctly before taking off. If your model comes with a kickstand, ensure it's retracted.

Step 5: Start Gliding

With the scooter powered on and all systems checked, gently push off with one foot and place it back on the scooter to enjoy the ride. Start with a slow speed until you're comfortable to increase pace.

**Additional Tips: **

• Always read the user manual for specific instructions related to your model.


• Keep your scooter's firmware updated for optimal performance.


• If your scooter doesn't turn on, check the battery and connections for any issues.

Following these steps will ensure you have a safe and pleasant experience with your Jetson Electric Scooter. Happy scooting!