Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Troubleshooting Your Scooter's Electric Starter: Common Issues and Fixes
It can be frustrating when your scooter refuses to start with the electric starter. There are several reasons why the electric starter might not be working, and this article will discuss these issues and offer solutions.
Dead Battery: The most common cause of a nonfunctioning electric starter is a dead battery. Check your battery's voltage level; if it is below nine volts, charge it or replace it.
Faulty Starter Relay: A faulty starter relay could be preventing the electrical circuit from closing when you press the starter button. Locate the relay (usually near the battery) and conduct a continuity test with a multimeter to determine if it needs to be replaced.
Damaged Starter Motor: If the starter motor's internal wiring or bearings are broken, the electric starter will fail to work. Visually inspect the motor for damage and have it professionally tested.
Malfunctioning Button or Wiring: Loose or damaged wiring between the starter button and relay can result in a nonfunctioning electric starter. Inspect the button and wiring for signs of corrosion, fraying, or poor connections.
Burnt Fuse: A burnt fuse can disrupt the flow of electricity. Locate your scooter's fuse box and inspect the fuses for blowouts or damage. Replace fuses as needed.
Reduction Gear Wear: If the motor spins but does not engage the engine, the reduction gear may be damaged. This situation is less common, but it can't be ruled out during troubleshooting.
In summary, a nonfunctioning electric starter can be caused by a dead battery, a faulty starter relay or motor, damaged wiring, a burnt fuse, or reduction gear wear. It is essential to perform routine maintenance on your scooter, regularly check these components, and address any problems immediately.
