How to Fix a Chain on a Razor Electric Scooter: A Step-by-Step Guide

Fixing a chain on a Razor electric scooter is a common issue that many riders face. With a few tools and some patience, you can get your scooter back in working order. Follow these steps to fix the chain on your Razor electric scooter effectively.

Tools You'll Need

• Adjustable wrench


• Screwdrivers (Phillips and flathead)


• Pliers


• Lubricant


• Protective gloves

Step-by-Step Guide

1. Turn Off the Scooter

Ensure your Razor electric scooter is turned off to prevent any accidental starts while you're working on it.

2. Locate the Chain

The chain is typically found on the rear wheel connected to the motor. Use the adjustable wrench to remove the chain guard, which will give you better access to the chain.

3. Inspect the Chain

Check for any visible damage or kinks in the chain. If the chain is broken, you’ll need to replace it. If it’s just off the sprockets, proceed to the next step.

4. Realign the Chain

Carefully place the chain back onto the sprockets. Ensure that the chain is properly seated on the teeth of both the motor and the rear wheel sprockets.

5. Adjust Chain Tension

Use the adjustable wrench to loosen the axle nuts. Adjust the position of the rear wheel to ensure that the chain has the proper tension. The chain should have about half an inch of play when you push down on it.

6. Secure the Chain Guard

Once the chain is aligned and tensioned correctly, reattach the chain guard using the screwdriver. Tighten all screws to make sure the guard is secure.

7. Lubricate the Chain

Use a lubricant to keep the chain running smoothly. Apply a thin layer of lubricant while turning the rear wheel to ensure even distribution.

8. Test the Scooter

Turn the scooter back on and take it for a short test ride. Listen for any unusual noises and check if the chain operates smoothly. Make any final adjustments as needed.

By following these steps, you can fix the chain on your Razor electric scooter and get back to enjoying your ride. Regular maintenance can help prevent future issues, so be sure to check the chain periodically.

Common Issues and Solutions

• Chain Keeps Falling Off: This could be due to improper tension or misalignment. Ensure the rear wheel is correctly positioned and the chain is neither too tight nor too loose.


• Chain Making Noise: Lubricate the chain and check for any debris in the sprockets.


• Broken Chain: If the chain is broken, you will need a replacement. It’s advisable to contact Razor for a new chain to ensure compatibility.

For further assistance, consider consulting the Razor electric scooter manual or contacting Razor customer service.