How to Set Up Your Mi Electric Scooter Essential: A Step-by-Step Guide

Setting up your Mi Electric Scooter Essential is a straightforward process that can be completed in a few simple steps. Follow this guide to ensure your scooter is ready for a smooth and safe ride.

Unboxing Your Mi Electric Scooter Essential

1. Open the Packaging: Start by carefully opening the box. Ensure that all the components, including the scooter itself, charger, screws, and manual, are present.

   
   



2. Remove Protective Materials: Take out all protective foams and covers used for shipping purposes.

   
   

Assembling the Scooter

1. Attach the Handlebars: Place the handlebar stem into the main frame. Align the holes and secure it using the included screws. Tighten the screws with the provided Allen wrench.

   
   



2. Install the Bell and Brake Lever: Some models might have the bell and brake lever installed, but if not, attach these to the handlebar according to the manual instructions.

   
   

Charging the Battery

1. Connect the Charger: Plug the charger into the charging port on the scooter, usually located near the footplate or under the handlebar stem.

   
   



2. Charge Fully: Ensure you charge the scooter fully before its first use. The LED light on the charger turns green when the scooter battery is fully charged.

   
   

Pairing with the Mi Home App

1. Download the Mi Home App: Available on both iOS and Android platforms, download the Mi Home App from your respective app store.

   
   



2. Sign In or Register: Create an account or sign in if you already have one.

   
   



3. Add New Device: Tap the 'Add Device' button, and select 'Mi Electric Scooter Essential' from the list.

   
   

1. Pair via Bluetooth: Ensure your phone’s Bluetooth is turned on. The app will prompt you to pair with the scooter. Follow the on-screen instructions to complete the pairing.

Performing a Pre-Ride Check

1. Tire Pressure: Ensure the tires are inflated to the recommended pressure as indicated in the manual.

   
   



2. Brake Function: Test the brakes to make sure they are working correctly.

   
   



3. Tighten Screws: Check and tighten all screws and bolts to ensure they are secure.

   
   

Ready to Ride

1. Turn On the Scooter: Press the power button to turn on the scooter.

   
   



2. Kick Off and Accelerate: Give a small kick-off to start moving and then gently press the throttle. Familiarize yourself with the scooter's controls and ride slowly at first.

   
   

By following these steps, your Mi Electric Scooter Essential should be ready for a fun and safe journey. Remember to always wear safety gear and follow local traffic laws.

Troubleshooting Common Issues

1. Scooter Not Turning On: Ensure the battery is charged fully. If the problem persists, consult the manual or contact customer support.

   
   



2. Bluetooth Pairing Issues: Restart the scooter and the Mi Home app. Make sure your Bluetooth is enabled.

   
   



3. Uneven Braking: Adjust the brake pads or refer to the manual for brake adjustment instructions.

   
   

For any further assistance, refer to the user manual or visit our support page. Happy riding!