How to Start Your Windgoo Electric Scooter: Step-by-Step Guide

Starting your Windgoo electric scooter is a straightforward process, but it's essential to follow the correct steps to ensure a smooth and safe ride. Here’s a detailed guide to help you get started effortlessly.

Step 1: Charge Your Scooter

Before you begin, make sure your Windgoo electric scooter is fully charged. Plug the charger into the scooter and allow it to charge until the indicator light shows it's complete.

Step 2: Power On

Locate the power button, usually found near the scooter's handlebars. Press and hold the power button for a few seconds until the display screen lights up. This indicates that the scooter is now powered on.

Step 3: Adjust the Settings

Some Windgoo electric scooters come with adjustable settings. Use the display panel to select your desired speed mode and any other preferences.

Step 4: Kick to Start

Many electric scooters require a small kick-off to engage the motor. Push off with one foot to get the scooter moving slightly, and then gently press the throttle lever to accelerate.

Step 5: Throttle Control

Use the throttle on the handlebar to control your speed. Start slowly to get a feel for the scooter's acceleration and braking.

Step 6: Brake Safely

Familiarize yourself with the braking system. Most Windgoo scooters are equipped with both electronic and manual brakes. Use them to slow down or stop as needed.

Additional Tips

• Safety Gear: Always wear a helmet and other protective gear.


• Flat Surface: Practice starting and stopping on a flat surface before venturing onto slopes or busy streets.


• Manual Inspection: Periodically check your scooter for any loose parts or maintenance needs.

By following these simple steps, you can ensure that you are starting your Windgoo electric scooter safely and efficiently. Enjoy your ride!