Razor E200 Electric Scooter: How to Attach the Brake

Razor E200 electric scooter is a popular choice among kids and adults. However, properly maintaining the scooter is crucial for long-lasting performance, and this includes knowing how to attach the brake system. In this article, we will guide you step-by-step on how to attach the brake for the Razor E200 electric scooter.

Step 1: Gather necessary tools and materials
To attach the brake on your Razor E200 electric scooter, you will need the following tools and materials:

• Adjustable wrench


• Phillips screwdriver


• Replacement brake assembly (if necessary)

Step 2: Disconnect the scooter’s power
Before working on any electric scooter, ensure that the power is off and the scooter is fully disconnected from the power source. This will ensure your safety while working on the brake system.

Step 3: Remove the rear wheel
Use your adjustable wrench to remove the axle nut and washer securing the rear wheel in place. Once this is done, slide the rear wheel off of the axle.

Step 4: Position the brake assembly
Place the chain tensioner over the brake assembly so that the holes align with the holes on the brake plate. Insert the two mounting bolts through the holes of the brake plate and tighten them.

Step 5: Reattach the rear wheel
Slide the rear wheel back onto the axle, ensuring that the chain is properly aligned and the brake band is seated on the wheel's brake drum. Replace the washer and axle nut and tighten them securely using your adjustable wrench.

Step 6: Adjust the brake cable
Using your Phillips screwdriver, loosen the brake cable adjusting nut found near the brake lever. Squeeze the brake lever, and pull the brake cable until the brake band fully engages with the wheel's brake drum. Tighten the adjusting nut while keeping the brake cable in position.

Step 7: Test the brake function
Once everything is securely tightened, reconnect the scooter’s power and switch it on. Test the brake function by applying the brake lever while pushing the scooter forward. The brake should engage, and the rear wheel should stop.

With these simple steps, you should be able to successfully attach the brake on your Razor E200 electric scooter. Regularly inspect and maintain your scooter's brake system to ensure optimal performance and safety during rides.