How to Change the Back Wheel on Your Mi Electric Scooter: A Step-by-Step Guide

Maintaining your Mi Electric Scooter is essential for ensuring a smooth and safe ride. One common maintenance task is changing the back wheel, which can seem daunting if you’ve never done it before. This guide will walk you through the process step-by-step, so you can ride with confidence. Let’s get started!

Tools You’ll Need

Before you begin, gather the following tools:

1. Allen Wrenches: Usually included with your scooter.


2. Phillips Screwdriver: For removing screws.


3. Tire Levers: These will help you remove and replace the tire.


4. Pump: For inflating the new tire.


5. Replacement Tire: Make sure it matches the specifications of your scooter.


6. Wrench: Adjustable or an 18mm wrench.


7. Lubricant: Optional, for easing the tire change process.

Step-by-Step Process

Step 1: Preparation

1. Power Off the Scooter: Ensure your Mi Electric Scooter is turned off and disconnect the battery if possible to avoid any electric shock risks.


2. Position the Scooter: Place the scooter on a flat surface, ideally elevating it with a stand or blocks for easier access to the back wheel.

Step 2: Remove the Back Wheel

1. Unscrew Bolts: Use the Allen wrenches and the wrench to unscrew the bolts holding the back wheel in place. Keep these bolts in a safe place.


2. Disconnect Brakes: If your model has brake cables connected to the back wheel, carefully disconnect them.


3. Slide Out the Wheel: Gently pull the wheel out of its position.

Step 3: Replace the Tire

1. Deflate the Old Tire: If it's not already flat, deflate it completely using a valve tool or by pressing down the valve stem.


2. Remove the Tire: Use tire levers to carefully pry the old tire off the wheel rim.


3. Install the New Tire: Place one side of the new tire onto the rim, insert the inner tube if applicable, and tuck in the other side of the tire. Use tire levers to ease this process if needed.


4. Inflate the New Tire: Use the pump to inflate the new tire to the recommended pressure. Check for any air leaks.

Step 4: Reattach the Back Wheel

1. Slide the Wheel Back: Carefully slide the wheel back into its original position, ensuring the brake disc (if present) aligns correctly.


2. Reconnect Brakes: Reconnect any brake cables you previously disconnected.


3. Secure the Bolts: Use the Allen wrenches and wrench to securely fasten the bolts back in place.


4. Check Alignment: Ensure the wheel spins freely and is properly aligned.

Final Checks

1. Test the Brakes: Ensure that your brakes are functioning correctly after reattachment.


2. Double-Check Bolts: Make sure all bolts are tightened securely.


3. Test Ride: Take a short test ride to ensure everything feels normal.

Conclusion

Congratulations! You have successfully changed the back wheel on your Mi Electric Scooter. Regular maintenance like this will help extend the life of your scooter and keep your rides smooth and safe. If you have any questions or run into any issues, don't hesitate to consult your scooter’s user manual or contact customer support.