Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Inflating the Back Tire of Your Electric Razor Scooter: A Step-By-Step Guide
To shop our replacement tires and learn more about the different types of tires for electric scooters, see here.
**We also have videos for replacing tires on youtube. **
Owning an electric razor scooter Owning an electric razor scooter can be a fun and efficient way to get around town, but maintaining optimal performance requires proper care and upkeep. One essential aspect of scooter maintenance One essential aspect of scooter maintenance One essential aspect of scooter maintenance One essential aspect of scooter maintenance is ensuring that the tires are inflated to the correct pressure. In this article, we'll provide you with a step-by-step guide on how to inflate the back tire of your electric Razor scooter.
Step 1: Locate the tire valve
The first thing you'll need to do is to locate the tire valve on the back wheel of your electric Razor scooter. This is a small, metal, tube-like protrusion with a cap on it, typically found on the inside area of the wheel near the rim.
Step 2: Remove the valve cap
Next, remove the valve cap by unscrewing it counterclockwise. Place it in a safe spot or pocket so you don't lose it.
Step 3: Check the recommended PSI
Before inflating the tire, check the recommended PSI (pounds per square inch) level for your scooter's tires. This information is usually provided by the manufacturer, either in the owner's manual or printed on the side of the tire.
Step 4: Use a tire pump
Now it's time to grab your bike pump. Connect the pump's nozzle to the tire valve by placing it over the valve and locking it in place. Depending on your pump, this may involve turning a lever or twisting a lock.
Step 5: Inflate the tire
Begin pumping air into the tire by pushing down on the pump’s handle. Keep an eye on the air pressure gauge either on the pump or a separate tire pressure gauge to ensure you don't overinflate. Once you reach the recommended PSI level, it's time to stop.
Step 6: Remove the pump nozzle
Carefully unlock and remove the pump nozzle from the tire valve. Make sure to do this gently to avoid damaging the valve.
Step 7: Replace the valve cap
Finally, screw the valve cap back onto the tire valve, securing it tightly. This will help to keep debris and dirt out and maintain proper tire pressure.
Congratulations, you've successfully inflated the back tire of your electric Razor scooter! Remember to periodically check the tire pressure to ensure you're always riding at optimal performance. Safe scooting!
