Unlock the Full Potential: Removing the Speed Limiter on a Xiaomi Pro 2 Electric Scooter

Electric scooters offer a convenient and eco-friendly mode of transportation for short distances. Among the popular options, the Xiaomi Pro 2 electric scooter is an impressive choice with great features. However, users who desire increased speed may feel limited by the scooter’s built-in speed limiter. In this article, we will provide a step-by-step guide on how to safely remove the speed limiter on a Xiaomi Pro 2 electric scooter, ensuring you can enjoy a quicker journey while still maintaining proper safety precautions.

Please note that modifying your electric scooter in any way may void its warranty and could result in a denial of support from the manufacturer. Proceed at your own risk.

1. Gather the necessary tools: To remove the speed limiter on your Xiaomi Pro 2, you will need a computer with an internet connection and a USB-to-serial adapter.

2. Download the required software: You will need to download a software called ST-Link to connect your scooter to your computer. You can find ST-Link on the official STMicroelectronics website or through online forums related to electric scooters.

3. Access the scooter’s control board: Using a screwdriver, carefully remove the scooter’s bottom plate to gain access to the control board. Locate the four-pin JST connector, which connects the control board to the motor. This connector is what you will link your scooter to your computer.

4. Connect your scooter to your computer: Using the USB-to-serial adapter, connect your scooter to the computer. Make sure the connections are secured and the scooter is powered off.

5. Launch the ST-Link software: Open the ST-Link software on your computer and ensure that it recognizes your scooter.

6. Backup the original firmware: Before making any changes to your scooter, it is crucial to create a backup of the original firmware. This way, you can revert to factory settings if anything goes wrong during the process. In the ST-Link software, create a new backup file on your computer and save the firmware.

7. Download modified firmware: Search online for modified firmware specifically designed for the Xiaomi Pro 2 electric scooter. Make sure to use reputable sources to avoid downloading harmful files. The modified firmware will remove the speed limiter from your scooter.

8. Flash the modified firmware onto your scooter: Using the ST-Link software, flash the modified firmware onto your scooter’s control board. After the process is complete, disconnect your scooter from your computer.

9. Reassemble the scooter: Securely reattach the bottom plate of your scooter and make sure all connections are connected properly.

10. Safety precautions: After removing the speed limiter, take caution when riding your scooter at higher speeds. Always wear a helmet and abide by local laws and regulations. Keep in mind that increasing speed can also shorten battery life and range.

By following these steps, you can safely remove the speed limiter on your Xiaomi Pro 2 electric scooter and enjoy faster rides. Remember, always prioritize safety and adhere to local regulations when using your e-scooter.