Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Unlock the Full Potential of Your Pure Electric Scooter: Removing the Speed Limiter
It’s no secret that electric scooters have become an increasingly popular mode of transportation. Thanks to their eco-friendliness, ease of use, and affordable price, more and more people are embracing EV scooters like the Pure electric scooters. However, some riders may be hoping to get more from their scooters and wonder how to remove the speed limiter.
It’s essential to understand that speed limiters are often in place for safety reasons and to comply with local laws and regulations. Removing the speed limiter may not only void your warranty but could also be illegal, so please ensure you're informed about your area's requirements.
That being said, if you're determined to remove the speed limiter, you can do so by following these steps:
Research: Familiarize yourself with the specific model of your Pure electric scooter. Ensure you understand how your scooter worksEnsure you understand how your scooter works, its components, and the potential risks of making alterations.
Locate the Speed Limiter: Most electric scooters have a physical speed limiter installed in the controller box. Removing this limiter will enable the scooter to reach higher speeds. To locate the controller box, consult your scooter's owner manual or look for it beneath the scooter deck.
Access the Controller Box: After locating the controller box, use a screwdriver and carefully open it up, taking care to keep all screws and components intact.
Identify the Limiter: Within the controller box, you'll find wires and electronic components. Look for a wire connected to the electronic speed controller (ESC) labeled speed limit or governor. This wire will likely have a loop or connector.
Disconnect the Limiter: Disconnect the speed limit wire by unplugging it from its connector or cutting the wire loop. Be cautious when cutting, as you don’t want to damage any other components.
Reassemble: After successfully disconnecting the speed limiter, reassemble the controller box and ensure all components are secure.
- Test Your Scooter: With the speed limiter removed, your Pure electric scooter should now be capable of reaching higher speeds. Test the scooter in a safe and controlled environment to ensure the modifications have worked.
Remember, removing the speed limiter comes with potential consequences. You should keep safety, legal implications, and warranty considerations in mind before altering your scooter. If you’re unsure, consult an expert or consider leaving the speed limiter intact.
