Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Step-by-Step Guide: How to Remove the Back Tire from Your Schwinn S180 Electric Scooter
To shop our replacement tires and learn more about the different types of tires for electric scooters, see here.
**We also have videos for replacing tires on youtube. **
Article Content: Owning a Schwinn S180 electric scooter comes with its fair share of maintenance, and one such task you may need to do is replace the back tire. Whether it's a flat tire or just a worn-out one, follow these simple steps to remove the back tire and get your scooter back in top shape:
Safety First: Ensure your electric scooter is turned off and disconnected from any power source. Place it on a flat surface, preferably with a mat to prevent any damage to the scooter or the surface.
Gather the Necessary Tools: You'll need a set of wrenches in various sizes (10mm, 13mm, 15mm, and 17mm), a rubber mallet, a flathead screwdriver, and a cloth or disposable gloves to protect your hands from potential grease and grime. A bike stand or support will also come in handy to keep the scooter stable during the process.
Remove the Rear Fender: Use the flathead screwdriver to pry off the four plastic caps covering the rear fender bolts. Unscrew the bolts with a 13mm wrench and carefully remove the rear fender.
Loosen the Brake Lever Assembly: Using a 15mm wrench, loosen the brake lever assembly from the brake drum to allow the rear wheel ample movement.
Disconnect the Motor Wires: Locate the quick connector within the rear wheel hub area, and simply disconnect it to free the motor wires.
Remove Rear Wheel Nuts: At the center of the rear wheel, you'll find a 19mm nut on either side. With a 17mm wrench, loosen and remove both nuts.
Slide the Rear Wheel off the Axle: Gently tap the axle with a rubber mallet to make it slide out, allowing the rear wheel to be removed from the scooter. Be careful not to damage the brake assembly.
Replace the Tire: To remove the old tire from the wheel, deflate it completely. Pry the tire bead from the rim using a flathead screwdriver, and slide the new tire onto the rim. Inflate the new tire to the recommended pressure.
Reinstall the Rear Wheel: Slide the rear wheel back onto the axle, and replace the nuts using a 17mm wrench. Reconnect the motor wires, tighten the brake lever assembly, and reinstall the rear fender.
With these steps, you've successfully removed the back tire from your Schwinn S180 electric scooter, giving it a smoother and safer ride. Remember to practice routine maintenance and keep an eye on the condition of your scooter's tires.