Step-by-Step Guide to Changing the Inner Tube on Your Pure Electric Scooter

Tools You'll Need:

• New inner tube (appropriate size for your Pure scooter model)


• Screwdrivers (both Phillips and flat-head)


• Adjustable wrench


• Tire levers (2 to 3)


• Pump

Step 1: Preparation
Begin by ensuring that your Pure Electric Scooter is switched off and stable. Lay it down on a flat surface with the side you’re going to work on facing up.

Step 2: Wheel Removal
Locate the bolts holding your wheel in place. Each Pure Electric Scooter model may have a different configuration. Use your adjustable wrench to carefully loosen and remove these bolts. Gently take the wheel off the scooter.

Step 3: Tire Detaching
With the wheel free, use the tire levers to pry the tire away from the rim. It’s crucial to do this gently to avoid damaging the tire or the rim. Work slowly around the edge until one side of the tire is completely off the rim.

Step 4: Removing the Damaged Inner Tube
Pull out the damaged inner tube from between the tire and the rim. Once removed, it’s a good practice to inspect both the tire and rim for any sharp objects or debris that could puncture the new inner tube.

Step 5: Inserting the New Inner Tube
Take your new inner tube and slightly inflate it just enough to give it shape. Carefully place the valve through the valve hole in the rim, and then work the inner tube into the tire.

Step 6: Reattaching the Tire
Begin to work the tire back onto the rim, starting opposite the valve. Use the tire levers if necessary, but ensure you don’t pinch the new inner tube. Once the tire is fully on the rim, you can inflate it to the recommended pressure.

Step 7: Wheel Remounting
Position the wheel back onto your scooter a, ensuring that it’s properly aligned. Tighten the bolts securely.

Step 8: Final Checks
Give your scooter a careful inspection to confirm everything is in place and properly tightened.

Troubleshooting Tips:
If you still notice issues with the tire after changing the inner tube, consider checking the tire for possible damages or replacing it entirely if necessary.

By following these steps, you’ve now successfully changed the inner tube on your Pure Electric Scooter. Regular maintenance can prevent future flats, so always keep an eye on tire pressure and tread wear.

For more information on maintaining your Pure Electric Scooter, visit here, where you’ll find resources and support to keep your ride smooth and safe.