Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Step-by-Step Guide to Installing the LED Display on Your Xiaomi Electric Scooter Pro
If you've recently purchased a Xiaomi Electric Scooter Pro or simply need to replace or upgrade your LED display, you're in luck! Installing an LED display on your scooter is a straightforward process that enhances your riding experience by keeping you informed about speed, battery level, and other crucial riding metrics. In this guide, we'll take you through the essential steps to successfully install your new Xiaomi Electric Scooter Pro LED display, ensuring that you're back on the road safely and in style.
What You'll Need:
- The LED display module designed for the Xiaomi Electric Scooter Pro
- A screwdriver set (including a Phillips head)
- The scooter's user manual for reference
- A clean, flat workspace
Step 1: Power Down
Before you begin, make sure your scooter is turned off and the battery is not being charged. This prevents any electrical issues or short circuits during installation.
Step 2: Access the Old LED Display
Locate the screws securing the top cover of your scooter's handlebars where the current LED display is housed. Using the appropriate screwdriver, gently remove these screws and lift the cover to expose the display unit.
Step 3: Disconnect the Current Display
Carefully disconnect the old LED display from the main handlebar. There may be a clip or latch securing the connection—release it carefully to avoid damaging the cables.
Step 4: Connect the New LED Display
Take your new LED display and connect it to the handlebar cable. Ensure the connection is snug and secure. If your LED display comes with additional features or different connectors, refer to the manufacturer's instructions for specific guidance.
Step 5: Position the New Display
Once connected, position the new LED display in the space provided on the handlebars. Make sure it sits flat and evenly before proceeding.
Step 6: Secure the Top Cover
Place the top cover back onto the handlebars, ensuring that the new LED display fits through the designated slot or opening. Secure it by screwing back in the previously removed screws. Do not over-tighten as this could damage the cover or the screws.
Step 7: Test the Installation
Turn on your scooter's power and test the new LED display for functionality. Check all the displayed information for accuracy and responsiveness.
Step 8: Ensure Everything is Secure
Before taking your scooter for a spin, ensure that all parts are secure and that you have not left any tools on or near the scooter.
Congratulations, you have successfully installed a new LED display on your Xiaomi Electric Scooter Pro! Enjoy the upgraded interface as you ride.
Remember, if you encounter any issues or are not comfortable performing these steps on your own, do not hesitate to seek professional assistance from a certified technician.
Stay safe and enjoy your ride!

