Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Ultimate Guide to Changing Your Razor EcoSmart Metro Electric Scooter Tire
To shop our replacement tires and learn more about the different types of tires for electric scooters, see here.
**We also have videos for replacing tires on youtube. **
Having trouble with a flat on your Razor EcoSmart Metro Electric Scooter? Fear not! Replacing or repairing the tire on your scooter is a straightforward process that can be completed with just a few tools and some patience.
Here's a step-by-step guide to getting you back to your smooth ride:
Step 1: Gather Your Tools
Before you begin, make sure you have the following items on hand:
- New electric scooter tire (specific to the Razor EcoSmart Metro model)
- Two flat-head screwdrivers or tire levers
- A wrench set
- An air pump (compatible with the tire's valve type)
Step 2: Secure Your Scooter
Turn off your scooter and ensure it is on a stable surface. If possible, elevate the scooter using a stand or prop it up so that the tire you are working on is off the ground.
Step 3: Tire Removal
Begin by using your wrench to remove the bolts on the wheel. Carefully take out the wheel from the scooter, paying attention to how the components fit together as you will need to reassemble them after changing the tire.
Step 4: Removing the Old Tire
Insert the flat-head screwdrivers or tire levers between the tire and the rim, and gently pry the tire off. Work your way around the rim until the tire is free. You might need to repeat this step on the other side of the tire to completely remove it from the wheel.
Step 5: Installing the New Tire
Check the new tire for any directional arrows that indicate the direction it should rotate. Place one side of the tire onto the rim, then work the other side on, using your tire levers or screwdrivers to assist if necessary. Be careful not to pinch the tire if it is tubed.
Step 6: Inflating the New Tire
Once the tire is on the rim, use your air pump to inflate the tire to the recommended pressure. This should be indicated on the tire's sidewall. Avoid over-inflation as it may damage the new tire.
Step 7: Reattach the Wheel
Place the wheel back into the correct position on the scooter. Replace and tighten the bolts securely with your wrench.
Step 8: Final Checks
Give the wheel a spin to make sure that it rotates freely and that the new tire is not rubbing against any part of the scooter. Check for any alignment issues or loose bolts.
Step 9: Test Ride
Once everything is secure, it's time for a test ride. Start slowly to ensure that the scooter is stable and the tire is performing as expected.
Changing your Razor EcoSmart Metro electric scooter tire is a simple process that can save you time and money. With this guide, you can ensure your ride is always ready to go.
