How to Turn On Your Gotrax Electric Scooter: A Step-by-Step Guide

Getting started with your Gotrax electric scooter is easy and straightforward. Follow these simple steps to power up your scooter and get ready for an enjoyable ride.

Step-by-Step Guide to Turning On Your Gotrax Electric Scooter

1. Locate the Power Button: The power button is usually situated on the handlebar or near the display screen, depending on the model of your Gotrax scooter.

   
   



2. Charge the Battery: Before turning on your scooter, ensure that the battery is fully charged. Plug the charger into the charging port, usually located on the side or the base of the scooter. A full charge typically takes about 3-4 hours.

   
   



3. Press the Power Button: Once the battery is charged, press and hold the power button for a few seconds. You should hear a beep or see the display screen light up, indicating that the scooter is on.

   
   

1. Check the Display: The display should show crucial stats like battery level, speed, and other essential information. Make sure everything looks good before you start riding.

   
   



2. Safety Checks: Before you hit the road, check the brakes, tires, and overall condition of the scooter to ensure it’s safe to ride.

   
   



3. Kick to Start: Depending on your Gotrax scooter model, you may need to kick-start the scooter by giving it a small push. Once you’re moving, use the throttle to control your speed.

   
   

By following these steps, you can easily turn on your Gotrax electric scooter and enjoy a smooth, hassle-free ride.

Troubleshooting Tips

• Won't Turn On?: Ensure the battery is fully charged and properly connected. Check for any loose wires.


• Error Messages: Consult the user manual to decipher any error codes displayed.


• Contact Support: If all else fails, reach out to Gotrax customer support for further assistance.