Step-by-Step Guide to Changing the Rear Tire Tube on Your Electric Scooter

Are you facing the challenge of a flat tire on your electric scooter? Say goodbye to the hassle of taking your scooter to a repair shop with this comprehensive guide on how to change the rear tire tube on your electric scooter.

With the growing popularity of electric scooters as a convenient and eco-friendly mode of urban transport, knowing how to perform basic maintenance, like changing a tire tube, is essential for every scooter owner. Whether you’re a seasoned pro or a first-time scooter owner, this guide will walk you through the process step by step.

Before beginning, ensure you have the necessary tools: a set of allen keys, a screwdriver, a tire lever or two, and a new inner tube specific to your scooter model.

Step 1: Safety First

• Turn off your electric scooter and ensure it’s completely powered down.


• Remove the scooter from its charging station if applicable.

Step 2: Scooter Preparation

• Lay your scooter on a flat and stable surface, ensuring the side you are working on is facing up.


• It’s best to work in a clean area to avoid losing any small parts or screws.

Step 3: Wheel Disassembly

• Use the allen keys and screwdriver to loosen the bolts or screws securing the rear wheel to the frame.


• Carefully detach the wheel from the scooter, noting the configuration of any washers or spacers to ensure proper reassembly later.

Step 4: Removing the Faulty Tube

• Once the wheel is detached, use the tire levers to pry the tire away from the rim to expose the damaged inner tube.


• Gently remove the flattened tube from the tire.

Step 5: Preparing the New Tube

• Before installing the new tube, check the inside of the tire for any debris or sharp objects that could puncture the new tube.


• Inflate the new tube slightly to give it shape, which will make the installation easier.

Step 6: Installing the New Tube

• Position the valve of the new tube through the valve hole in the rim, and then tuck the rest of the tube into the tire.


• Work the tire’s edge back into the rim with the tire levers, making sure not to pinch the new tube.

Step 7: Reattaching the Wheel

• Once the tire is back on the rim and the new tube is installed, put the wheel back onto the scooter.


• Reattach any washers or spacers in the correct order, and tighten the wheel bolts or screws securely.

Step 8: Testing

• Inflate the new tube to the recommended pressure, found in your scooter's user manual.


• Turn the wheel by hand to ensure it spins freely and doesn’t rub against the brake pads or frame.

Step 9: Final Checks

• Power on your scooter and take it for a slow, short ride on a flat surface to ensure the repair was successful.

And there you have it! You’ve just changed the rear tire tube of your electric scooter and are ready to hit the road again. Remember to perform regular checks on your tire pressure and condition to prevent future flats.

For more scooter maintenance For more scooter maintenance For more scooter maintenance tips and tricks, keep exploring our website for expert advice and quality scooter parts.