top of page
Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Step-by-Step Guide to Changing Tires on Your Electric Scooter
To shop our replacement tires and learn more about the different types of tires for electric scooters, see here.
**We also have videos for replacing tires on youtube. **
Changing tires on an electric scooter is an essential skill that can save you time and money on maintenance. Here's a step-by-step guide to get you rolling smoothly again in no time.
Tools and Materials Needed:
- New electric scooter tire(s)
- Screwdrivers or Allen wrenches
- Tire levers
- Air pump or compressor (for pneumatic tires)
- Wrench set
Steps to Change Your Electric Scooter's Tires:
- Safety First: Ensure your electric scooter is powered off and the battery is disconnected.
- Access the Wheel: Remove any screws or bolts using the appropriate screwdrivers or wrenches to detach the wheel from the scooter.
- Remove the Old Tire: Pry the tire off the rim using tire levers, carefully working your way around the edge.
- Inspect the Wheel: Before putting a new tire on, check the rim and inner tube (if applicable) for damage.
- Mount the New Tire: Place one side of the tire onto the rim, and then push the other side over, using the tire levers if necessary.
- Reinflate Pneumatic Tires: If your scooter uses pneumatic tires, inflate the new tire to the recommended pressure.
- Reattach the Wheel: Place the wheel back on the scooter, tightening all screws and bolts securely.
- Test: Give the wheel a spin to ensure it moves freely and test the scooter at a slow pace to confirm everything is installed correctly.
Regularly check your electric scooter tires for wear and tear, and replace them as needed to ensure the longevity and safety of your ride.
![](https://static.wixstatic.com/media/855cc0_e23e880fee7f4beb90a4ce2b91b3ba5a~mv2.png/v1/fill/w_20,h_10,al_c,q_85,usm_2.00_1.00_0.00,enc_auto/Path%201_2x.png)
![](https://static.wixstatic.com/media/855cc0_e23e880fee7f4beb90a4ce2b91b3ba5a~mv2.png/v1/fill/w_20,h_10,al_c,q_85,usm_2.00_1.00_0.00,enc_auto/Path%201_2x.png)
bottom of page