Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Ultimate Guide to Charging Your Hover-1 Electric Scooter Effectively
Ensuring your Hover-1 electric scooter is always ready to roll means keeping it charged and good-to-go. To charge it correctly and maintain long battery life, follow these essential steps:
Locate the Charging Port: Find the charging port, typically situated on the deck of the scooter, near the rear wheel.
Use the Correct Charger: Always use the charger that came with your Hover-1 scooter. Third-party chargers can damage your battery.
Plug In the Charger: Insert the charger plug into the charging port on your scooter, and then plug the other end into a wall outlet. Make sure the outlet voltage matches the charger's requirements.
Check the Indicator: Most Hover-1 scooters have an LED light on the charger that indicates the charging status—red means charging while green indicates a full charge.
Allow for Full Charge: Depending on your scooter model, charging can take anywhere from 3 to 12 hours. Refer to your specific model's manual for exact times.
Disconnect Safely: Once fully charged, unplug the charger from the wall outlet first, then from the scooter to prevent any potential electrical surges.
- Regular Maintenance: For best performance, charge your Hover-1 electric scooter's battery after each use. Avoid letting the battery discharge completely.
Following this charging guide will keep your hover scooter in prime condition for every ride. Remember, proper charging is key to battery longevity and consistent scooter performance.
